Agent: | FM200 |
---|---|
Type: | Auto Fire Extinguisher System |
Object: | Class D Fires |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description:
PRI-SAFETY Tube Type Fire Suppression System for Car Engine is a type of fire suppression system that uses a flexible tube filled with a fire suppressant agent (FE-36 clean agent) to extinguish fires. The tube is typically installed in areas where fires are likely to occur, such as car/bus/school bus engine compartments.
When a fire breaks out, the heat from the flames will cause the tube to rupture and release the suppressant agent directly onto the source of the fire, extinguishing it before it can spread. The tube acts as both the delivery system and the suppression agent, making it a simple and effective solution for protecting small spaces.
PRI-SAFETY Tube Type Fire Suppression System for Car Engine commonly used in vehicles, such as cars, buses, and boats, as well as in small enclosed spaces like electrical cabinets and server rooms. They are often preferred over traditional fire extinguishers because they require less maintenance, are less prone to accidental discharge, and can be installed in hard-to-reach areas.
The Car Engine Automatic Fire Extinguisher Tube helps to protect vehicle engine compartments and vastly reduces the riskof fire spreading to other parts.
The tube consists of a heat sensitive tube which is sealed at either end with stainless steel
fittings. The tube acts as both the storage medium and as the fire detector.
The tube is unaffected by temperatures of up to 120 Degrees Centigrade but fire is of course much hotter and will cause the tube to burst, immediately extinguishing any nearby flames.
The detection tube is filled with clean agent which is almost odourless discharges as a liquid instantly dispersing in the
form of a gas and leaves no residue. Importantly the fluid itself does not conduct electricity or cause thermal shock damage.
Comparing with powder or foam agent,you get the additional benefit that after use there is no extinguishant residue and
consequently none of the cleanup cost associated with foam and powder. The system requires no maintenance during its entire
working life.
It can be installed by any competent individual, and thus no training is required for installation.
Code | TFS-0.5 | TFS-01 | TFS-02 | TFS-03 | TFS-04 | TFS-05 | TFS-06 |
Length x Dia | 0.5mx18mm | 1mx18mm | 2mx18mm | 3mx18mm | 4mx18mm | 5mx18mm | 6mx18mm |
Agent Capacity | 100g | 200g | 400g | 600g | 800g | 1000g | 1200g |
Protection Space | 0.1 ~0.125m3 | 0.2~0.25m3 | 0.4~0.5m3 | 0.60~0.75m3 | 0.80~1.00m3 | 1.0~1.25m3 | 1.20~1.50m3 |
Agent Type | FE-36(HFC-236fa) | ||||||
Material |
Polyamide Tube
|
||||||
Pressure at 20° C | 1~4 Bar | ||||||
Pressure at 100° C | 15bar | ||||||
Burst Temperature | 120° C± 10 ° C | ||||||
Working Temperature | -40° C~+90° C | ||||||
Shelf Life of Systems | 5 years |
Installation Method:
Installation Precautions of Tube Type Automatic Fire Extinguisher Systems Filled with FE-36 for On-road Vehicles:
Product Application:
Tube Type Automatic Fire Extinguisher Systems Filled with FE-36 for On-road Vehiclesare used to protect the enclosed space, including but not limited to:
Suppliers with verified business licenses