Dry Powder Wheeled Fire Extinguisher 50kg ABC40 with External Cartridge

• Customization: Available
• Agent: Dry Powder
• Type: Transportable Fire Extinguisher
• Model NO.: PSE26-02
• Object: Class A Fires
• Size: 50kg
• Certification: CE
• Portable Extinguisher: Portable Foam Fire Extinguisher
• Effective Range: 9m
• Retirement Life: 8 Years
• Dry Powder Type: Dry Powder
• Power Source: Pressure Fire Extinguisher
• Fire Extinguisher Name: Foam Wheeled Fire Extinguisher
• Fire Extinguisher Material: Carbon Steel
• Fire Extinguisher Size: 50L
• Fire Extinguisher Diam: 320
• Fire Extinguisher Volume: 59L
• Fire Extinguisher Length: 875
• Fire Extinguisher Weight: 100kg
• Fire Extinguisher W.P: 14bar
• Fire Extinguisher T.P: 27bar
• Fire Extinguisher Fire: 55A I B C
• Transport Package: Export Carton
• Specification: ce en3
• Trademark: pri-safety
• Origin: China
• HS Code: 84241000
• Production Capacity: 2000000

Product Description

 Dry powder Wheeled Fire Extinguisher 50kg
 
·ISO 9001 certified quality management system,CE approved
·Suitable against class A, class B, class C, and live electrical fires
·All fire extinguishers must be serviced in accordance with BS5306
·Polyester powder external coating (Red, Cream)
·All fire extinguishers are tested no leakage.
·Chemical Agent: ABC40%, Pressured with nitrogen gas.
·Working Pressure: 15Bar; Test Pressure: 35Bar;
·EN1866-1 Certification


 

Dry Powder Wheeled  Fire Extinguisher
	External Type
Capacity	25kg	50kg	100kg
Item No.	PSE26-01	PSE26-02	PSE26-03
Out-Dia.(mm)	270	320	406
Volume(L)	30	59	124
Cylinder Length(mm)	625	875	1100
Cylinder Weight(kg)	20	32	50
Extinguisher Weight(kg)	60	100	180
Filled Weight(kg)	25	50	100
Temperature Range	-20ºC-55ºC	-20ºC-55ºC	-20ºC-55ºC
Working Pressure(bar)	--	--	--
Test Pressure(bar)	35	35	35
Min Wall-Thickness(mm)	2.5	3.0	3.0
Material	HP295/B440HP	HP295/B440HP	HP295/B490HP
Fire Class	55A 1BC	55A 2BC	55A 3BC
Packing Size(cm)	44X45X95	63X50X111	61X52X112

Operations Instructions
1. Before attempting to fight a fire with a fire extinguisher it is important to check that it is fully charged (Fig. 1) and that the safety pin is not bent (Fig. 2)
2. Ensure you remain a safe distance from the fire and remove the safety pin (Fig.3) this will break the tamper seal
3. Aiming the extinguisher:
a) Solid Materials: Aim the hose at the base of the flames, moving across the area of the fire
b) Spilled liquids: Aim the hose at the near edge of the fire and with a rapid sweeping motion, drive the fire towards the far edge until all the flames have been extinguished
c) Flowing liquid: Direct the hose at the base of the flames and sweep upwards until all the flames have been extinguished
d) Electrical equipment: Switch off the power (if safe to do so) and then direct the hose straight at the fire
4. Squeeze the lever slowly to begin discharging the extinguisher, as the fire starts to diminish carefully move closer to it
5. Ensure all the fire has been extinguished, re-ignition can be possible when a powder fire extinguisher has been used