UL Listed ABC Dry Powder Fire Extinguisher 2.3kg

Product Description

 UL Listed ABC Dry Powder Fire Extinguisher 2.3kg
 
·Multipurpose Fire Extinguisher
·High performance dry chemical powder
·EPDM heavy duty hose
·Steel cylinder with corrosion resistant epoxy power paint finished.
·Wall hanger hook or brackets are available
·UL and ULC approved
All the above listed UL and ULC standard ABC dry chemical fire extinguishers are using high quality ABC dry powder. Nitrogen and helium is adopted as propellant gas.
This kind of fire extinguishers is suitable for buildings, marines, boats, factories, houses, gas oil plant, military place, etc.
It has high quality and is suitable for severe environments as high temperature, high pressure, and strong sunlight.



 

Capacity(lb)	2.5LB	5LB	10LB	20LB
Fire Rating	1A/10B/C	2A/40B/C	4A/60B/C	10A/120B/C
Discharge Time(sec)	9	14	18	26
Height(mm)	380	405	482	593
Width(mm)	130	155	170	198
Diameter(mm)	85	110	143	180
Gross Weight(LB)	6	9	15 1/2	30 1/2
Working Pressure(Psi)	195	195	195	195
Testing Pressure(Psi)	585	585	585	585
Temperature Range	-40-120ºF	-40-120ºF	-40-120ºF	-40-120ºF
Bracket	Wall Bracket and Marine Bracket

Operations Instructions
1. Before attempting to fight a fire with a fire extinguisher it is important to check that it is fully charged (Fig. 1) and that the safety pin is not bent (Fig. 2)
2. Ensure you remain a safe distance from the fire and remove the safety pin (Fig.3) this will break the tamper seal
3. Aiming the extinguisher:
a) Solid Materials: Aim the hose at the base of the flames, moving across the area of the fire
b) Spilled liquids: Aim the hose at the near edge of the fire and with a rapid sweeping motion, drive the fire towards the far edge until all the flames have been extinguished
c) Flowing liquid: Direct the hose at the base of the flames and sweep upwards until all the flames have been extinguished
d) Electrical equipment: Switch off the power (if safe to do so) and then direct the hose straight at the fire
4. Squeeze the lever slowly to begin discharging the extinguisher, as the fire starts to diminish carefully move closer to it
5. Ensure all the fire has been extinguished, re-ignition can be possible when a powder fire extinguisher has been used